Popular Resources
-
<% blocks.forEach(function(block, index) { %>
-
<% if (imageHeight) { %>
<% } %>
<% if (block.name) { %><% if (block.html_url) { %> <%= block.name %> <% } else { %> <%= block.name %> <% } %>
<% } %> <% if (block.description) { %><%= block.description %>
<% } %>
<% }) %>
Comments
16 comments
Error message- Unknown error (code: 180), cannot take off, please select dji customer support.
Error message - aircraft not connected to RC
Here is a link. As indicated you may have issues with that S22 Device. A second link which may help and is still in Beta.
https://support.dronelink.com/hc/en-us/articles/15304402363411-Mini-3-Mini-3-Pro-Support-Overview
https://support.dronelink.com/hc/en-us/articles/360025829933-What-are-the-system-requirements-Supported-drones-and-devices-
Thank you, I believe the phone may be the problem.
I tried the other troubleshooting options to no avail
https://support.dronelink.com/hc/en-us/community/posts/17699016016659-4-7-0-263-Telemetry-unavailable-mini-3-pro?page=1#community_comment_17716655889811
Thank you, this worked!!!
I have the same issue. Drone: Mini 3 Pro. RC: RC N1. Dronelink installed from APK. Device: Oppo Reno 11 5G. Drone does not connect to app and when I try to pair drone with controller, I get the error REQUEST_HANDLER_NOT_FOUND
Just checked the app version and its Beta 5.2.2. How do I install an earlier working APK
Hi Damian. There is no reason you should have needed to pair the controller before using the DL mobile app. Once the controller has been paired to the drone in the DJI Fly app it is not needed to be done again. The ability is there within the DL mobile app but in my opinion It’s just better to use the DJI Fly app to pair the controller to the drone. So first I’d pair the controller to the drone with the DJI Fly app and then check to make sure it’s working properly and you can fly it. Once it’s been paired and working with the DJI Fly app then try to connect to the DL mobile app.
(Very Important ! ! !) You must always Force Stop any other app you have used with the drone before using another app. Follow the instructions in the link from number 3.2 to see how to properly Force Stop the DJI Fly app. If any app has not been properly Forced Stopped then the drone may not connect to the other app because two apps cannot be connected at the same time.
https://support.dronelink.com/hc/en-us/articles/360052025194-Why-is-Dronelink-unable-to-connect-to-my-drone
Thank you Mike. I was able to pair the drone with the DJI Fly App then force stop it and it connects in Dronelink 5.2.2. However, I can do a manual mission in DroneLink but when I create a plan, I do not see the play button.
Since you’re new to Dronelink I suggest going through the support section which has a ton of information.
https://support.dronelink.com/hc/en-us/articles/1500007183422-Starting-Flying-a-Pre-Planned-Mission
Hey Daman. Haven’t heard back from you in a few days but curious of you figured out how to load a mission. Hope it’s working for you now. Enjoy.
Hi Mike. Thank you so much for reaching out. I was not able to try things out due to wet and windy weather here but had a go this morning and it worked. I was able to run a small map plan and a small waypoint plan with success. Thanks so much for your assistance.
You’re welcome. It will take time to learn all the functions and features the app offers. The more often you use the various components the more quickly you will learn how they work and how they will perform. As always, if you can’t find the answer in this forum or in the support section there are others here to assist you. If it’s a question about setting up a plan to meet your needs I’m confident someone here can help you. Good luck and enjoy.
Please sign in to leave a comment.