That will depend on when or if dji decide to add it to an SDK, if they do it's generally been about a year after release in the past, and there's no guarantee that they will add it to an SDK, without SDK support then no third party will be able to use it
I have a Mini 4 Pro, purchased with a RC2, and a Neo, purchased with a RC-N3. I use dronelink with the RC-N3 on the Mini 4 Pro and it works perfectly. The only problem is that i cannot use the cellular dongle while using dronelink.
WiFi or cell service is not needed to run a most missions. They can be downloaded to run offline. Also the RC-N3 still doesn’t have DJI SDK support unless it was added very recently. It’s up to DJI to get it compatible with third party apps.
What i wanted to say is that i use the RC-N3 with the Mini 4 Pro to execute missions with Dronelink, using an android device.
In regard to the cellular dongle, it is a device that can connect drone and remote via cellular network. But this only works using the dji fly app, not the Dronelink. It is a shame, because it would make some of my needed use cases a lot simpler.
Ya se va a cumplir 1 año desde el lanzamiento del dron Dji mini 5 pro ¿Qué se sabe sobre Kit de Desarrollo de Software (sdk) ? HAY OPCIÓN DE USARLO CON DRONELINK?
nicolas aguilera. No, there is no way to use the DL mobile app to fly missions without the SDK. It is up to DJI as explained above. DL nor any other third party app will work without it.
You can convert and export the KMZ file into the Fly app so it can be ran with the DJI Fly app but it will only give you basic functionality.
Comments
11 comments
That will depend on when or if dji decide to add it to an SDK, if they do it's generally been about a year after release in the past, and there's no guarantee that they will add it to an SDK, without SDK support then no third party will be able to use it
But what if u are flying it using the rc-n3 controller? wouldnt you be able to use it like u are able to use the Mini 4 Pro?
If you read this article about support for the mini 4 pro, you'll see that controller isn't supported at the moment
https://support.dronelink.com/hc/en-us/articles/39718021407379-Mini-4-Pro-Support-Overview
https://support.dronelink.com/hc/en-us/articles/16590137443859-Drone-not-supported-Why-are-some-drones-not-supported
https://support.dronelink.com/hc/en-us/articles/360050489253-When-will-Dronelink-add-support-for-DJI-s-new-drones
I have a Mini 4 Pro, purchased with a RC2, and a Neo, purchased with a RC-N3. I use dronelink with the RC-N3 on the Mini 4 Pro and it works perfectly. The only problem is that i cannot use the cellular dongle while using dronelink.
WiFi or cell service is not needed to run a most missions. They can be downloaded to run offline. Also the RC-N3 still doesn’t have DJI SDK support unless it was added very recently. It’s up to DJI to get it compatible with third party apps.
What i wanted to say is that i use the RC-N3 with the Mini 4 Pro to execute missions with Dronelink, using an android device.
In regard to the cellular dongle, it is a device that can connect drone and remote via cellular network. But this only works using the dji fly app, not the Dronelink. It is a shame, because it would make some of my needed use cases a lot simpler.
Ya se va a cumplir 1 año desde el lanzamiento del dron Dji mini 5 pro ¿Qué se sabe sobre Kit de Desarrollo de Software (sdk) ? HAY OPCIÓN DE USARLO CON DRONELINK?
nicolas aguilera. No, there is no way to use the DL mobile app to fly missions without the SDK. It is up to DJI as explained above. DL nor any other third party app will work without it.
You can convert and export the KMZ file into the Fly app so it can be ran with the DJI Fly app but it will only give you basic functionality.
https://support.dronelink.com/hc/en-us/articles/4410621290387-Onboard-DJI-Waypoint-Missions-Convert-and-Export-to-KMZ#h_01JVAPPKB2NV0VXAGEG0W92RKE
Please sign in to leave a comment.