gimbal orientation failed
I am flying the mini with Samsung S21. While performing a mission (which I have flown before) I receive this error msg.
Is this a Dronelink error msg. or a DJI error msg.? What does "you may need to reorder/remove this". I have tried several times restarting the drone but nothing works.
Comments
13 comments
This error means the DJI SDK returned an error when Dronelink tried to command the gimbal. Can you post a link to your mission plan?
I think I got the post right, never did it before. But if this is a problem for DJI should I be bothering you with it? I am already dealing with DJI on a Dronelink mission in which the drone issued an autolanding as if I had run out of battery but it was at 90%. It almost landed on the heads of outdoor diners. I was performing an Orbit when all of a sudden I got the fast beeping sound of an autolanding and it just started to drop. Many people in the DJI forum said that I was mistaken, that it can't happen, but I have the flight record to prove it did.
Just click share to get the link (and post it here):
Not sure yet, need to see the mission plan.
https://app.dronelink.com/robert-scheffler/memorial-park-eM3g45zNX7hJNsvHWSDc/plan/wx3puqqjnzTIF2d9Bq3I/U7t7mYnyFW9fo4oM38JB
How's this?
Just found that this mission did the same thing as the other and I was watching the screen when it was flying and going up and down erratically.
https://app.dronelink.com/robert-scheffler/gordon/plan/4CEB5TUTxy1vmczztpXd/ad4QyQJEcV3HdrhTyMTm
Your mission plan is attempting to issue gimbal commands on channels 0, 1, and 3:
You should remove the channel 1 and 3 commands because your Mavic Mini only has one gimbal.
I did not even know what the channel meant. I thought it was like a channel on a radio. You were right though once I removed them the mission flew fine. Thanks Jim
Hola, tengo el mismo problema de orientacion de gimbal fallida, itenté cambiar de angulo a -85 y -84 pero no me permite realizarlo. adjunto link de mi plan de vuelo
https://app.dronelink.com/david-fernandez/my-first-project/plan/RKHDyDgL8BnIycEiInKh/ergbp5N3kKguT2M93UZw
The error you are getting is actually:
Are you on the latest firmware? If so, it sounds like there is a hardware issue with your drone.
Jim I am flying the air 2 s with iphone. i receive this error, how can i fix it?
Assuming you are on the latest firmware, you probably need to check your hardware and / or do gimbal calibration.
Hi Jim ! I have the same problem with my mavic air 2s . “ gimbal orientación Failed” .How do I get to gimbal Chanel configuration?? Thanks
It is unlikely to be your problem if you didnt change the channel in the first place, which requires expert mode:
https://support.dronelink.com/hc/en-us/articles/6440699906707-Mission-Planner-Mode-Normal-Expert
Are you on the latest firmware?
Please sign in to leave a comment.