Tengo porblemas al ejecutar la mision en el dji mini 4 pro
Cuando se va ejecutar la misión inicia bien el arranque y el primer punto pero cuando ya para al segundo punto el dron se sale de la ruta y se queda la aplicación, se pausa la trayectoria y al ranudar otra vez la misión inicia bien pero vuelve a pasar lo mismo se venta de la ruta establecida. No se que pasa ya que se debes eso. ya intento bajarle la velocidad de vuelo, lo hice en un dia de poco viento y las 3 veces que intentte dos veces me cerro la aplicacion. no se que hacer
Comments
10 comments
Check the DL support section. A ton of info available. If you can’t get it to work then you can share the plan to see if something is causing the issue. What error message are you having ? DL may need more specific info, screenshots or recordings to assist further.
https://support.dronelink.com/hc/en-us/articles/360056104694-Why-do-I-see-Unable-to-Take-Control-or-Automatic-Control-Interrupted-during-missions
No me sale ningún error, solo la app dronelink se pone lenta, el drone no sigue la ruta y luego de unos segundo se para la mision o se cierra la aplicacion directamente. Igual voy a mirar el link que me envías para revisar
What device are you using ? Make and model.
Un Xiaomi Redmi Note 11 pro
Ok. Can you try a newer device. Sounds like it may be the device if it’s pausing and then able to resume after a few seconds which allows the processor to catch up. Usually it says Device running too Slow at the top. It may not be the issue but very possible. That device may work ok but it is about three years old and DL recommends a device released within the last year, maybe two years and not all Android OS devices have the same processing power. As I mentioned, it may not be why but only way to know for sure is if you use a newer device. I did look at the benchmarks and it indicates on the low side of processing power.
https://support.dronelink.com/hc/en-us/articles/360025829933-What-are-the-system-requirements-Supported-drones-and-devices
Hi.
When I use the Mini 4pro It starts flying and then it says: the drone is too far from the planned route.
The drone goes too fast and the app won't allow me to change the speed.
Any comments?
LISTO MIKE ANALIZARE ESO.
JUAN DAVID TAMBIEN ME PASO PERO LUEGO LE CAMBIE LA VELOCIDAD DE EJECUCION DE VUELO PERO IGUAL SE ME VA DE LA RUTA. SEGUN COMENTA MIKE QUE ES TBM POR EL TELEFONO QUE SE QUEDA NO SE SI TE PASA IGUAL
Drone too far off course is usually due to winds and speed set too high. You can change the speed in the Web app. There is a ton of support in DL’s help articles.
https://support.dronelink.com/hc/en-us/articles/360052533153-Why-does-the-drone-fly-off-course-or-make-jerky-movements-during-certain-mission-plans
I have tried to do what you say but the web app won't allow me to change the speed, and I have tried with many devices including the Samsung Galaxy S24 Ultra. Let me share screenshots
Can you switch to english and try?
Please sign in to leave a comment.