Mission stop
Hi all, I tried a mission this morning with my air2s and at 496 meters the mission stopped and wouldn't restart. i tried again same thing, i flew a manual flight and the air 2s flew well over that distance. any thoughts???
i had the rc n1 pointing at the drone
Comments
5 comments
Can you possibly share the mission as explained here https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans then maybe someone can see what the problem is
https://app.dronelink.com/david--pyrah-oYV01KSCYUB3QpZZ0SAN/my-first-project/plan/kUmb9rd1Nwy62SEfU1ji/UQgCjpkaTwxQJS0exy7G
Hey David. Did it stop with an error message or did the drone disconnect. The DL app needs a constant and clear connection at all times. Even if there is a brief interruption from any interference or loss of satellites the app will stop. So was it an error or was it a drone disconnect. The app has nothing to do with the connection between the drone and controller so if it was a disconnect then it’s not the app. Please advise.
This might help
https://app.airdata.com/share/ixspkR
The drone lost connection to the controller at about 3:40 into the mission around 1/4 mile away. I’m guessing something in that area is interfering with the signal. As mentioned above, it needs to have a constant and clear connection at all times during the mission.
Please sign in to leave a comment.