Mini 3 Pro Pictures Out of Focus
Hi
I have created a mission in Dronelink using a Mini 3 Pro however, when looking at the images taken after the mission has been flown, they are out of focus.
Would appreciate your advice as to how to overcome this issue.
Best regards
Steve Claxton
Comments
9 comments
Can you possibly share the mission please, so th had we can see how it's set up
Sharing the mission will help as a Martin requested. Whether using DL or the DJI app the camera works the same so it is always in the set up of the camera and usually the max speed being set too fast.
Please use the link below to see the mission
https://app.dronelink.com/david-moore/whiehouse-farm/plan/Nk8uez7YspwQwlktaqyh/I7CqIi3F5f9973evxfb5
Mission plan link below
https://app.dronelink.com/david-moore/whiehouse-farm/plan/Nk8uez7YspwQwlktaqyh/I7CqIi3F5f9973evxfb5
Those links won’t load for some reason. Double check the share link and try again. I would always suggest sharing a direct link as a viewer only.
https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans
Another attempt. Hopefully this link works:
https://app.dronelink.com/david-moore/whiehouse-farm/plan/Nk8uez7YspwQwlktaqyh/JIWaKMcg60DDTMeQYYQR
I've tested it and seems to work ok.
Best regards
Got it. Speed is set too fast at max speed of 20 mph and mission preview indicates it’s flying at actually about 12 mph while taking images at 131’ in altitude. The higher the altitude the faster you can fly and the lower in altitude the slower you need to fly. Most mapping mission run at approximately the default altitude of about 285’ plus or minus to get clear images. If your fly at that altitude I’d suggest setting the max speed much lower otherwise you will not get clear images. The drone has a rolling shutter, not a mechanical shutter so motion blur is way more prominent. Try at 5 to 7 mph and see how they look and/ or increases altitude. The only other way is of you have a professional plan which supports capture speed. Then you can set that which would alleviate the problems.
I fly mapping mission at the default 285' and max speed of 20 MPH with no problems with mini2, here's my biggest project
https://atlas.maphub.online/?ll=53.16909%2C-2.18646&z=16
Many thanks for your advice on this community. Will be taking this into account and replanning missions using your information.
Many thanks
Please sign in to leave a comment.