Popular Resources
-
<% blocks.forEach(function(block, index) { %>
-
<% if (imageHeight) { %>
<% } %>
<% if (block.name) { %><% if (block.html_url) { %> <%= block.name %> <% } else { %> <%= block.name %> <% } %>
<% } %> <% if (block.description) { %><%= block.description %>
<% } %>
<% }) %>
Comments
21 comments
We don’t see any plan. You will need to share it. If it is the “Veulo 1 FGLYL” mapping plan you shared on the other thread you posted then what issue are you having with the plan ? Other than the size which is fairly large.
https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans
Hola estimado Mike, el plan es el mismo.
Error de Ubicacion de la casa.
Hice practicamente todo lo recomendado menos reordenar o eliminar este componente , no se donde debo hacerlo ?
Es correcto el mapa es bastante grande, por ese lo hice en dos misiones.
Cuantas hectareas es lo maximo?
What error ? if it’s the Aircraft encoder Error then that link in the other thread explains it. If there are no errors being reported in the DJI Fly then it’s a false error and safe to fly. So just either ignore it or hide the error so you won’t see it.
https://support.dronelink.com/hc/en-us/community/posts/6850187517587-Map-Planner-2-Map-Size-Limit-can-t-open-previously-created-missions
Totalmente de acuerdo con lo que menciona , segui las intrucciones y lo que no he echo aun es es poder REORDENAR O ELIMINAR ESE COMPONENTE, tiene un enlace para ver como debo hacerlo?
Y lo del error falso y seguro volar lo entendi, el problema es que no me deja volar.
Gracias..
It appears that the mission plan has dynamic home location enabled, and it is unable to update the home point because it is more than 30m away from the current RC location or the take-off location, as the error message says. You either need to stay closer to the drone or turn off dynamic home location on this mission plan. Is there a reason you are wanting to use dynamic home location while mapping?
Buenos dias , gracias por la pronta respuesta.
No tengo ninguna razon para utilizarla, y para ser honesto ni siquiera se como desactivarla.
Entiendo que en su mayoria estos errores , son por falta de experiencia, he visto cantidad de videos pero en la practica es otra cosa.
Nuevamente le agradeseria que me compartar algun enlace para poder desactivarla.
Saludos cordiales
Buenas noches , muchas gracias por el soporte técnico.
Ya pude realizar los planes de vuelo sin complicaciones 🤝🏻🙌🏼
hola estimado cual fue la solucion ??? tengo el mismo problema, saludos desde chile
hola estimado cual fue la solucion ??? tengo el mismo problema, saludos desde chile
hola estimado buenas tardes, tengo el mismo problema como lo soluciono.
The solution is what I posted above.
lo de las imagenes estimado soporte ?
It appears that the mission plan has dynamic home location enabled, and it is unable to update the home point because it is more than 30m away from the current RC location or the take-off location, as the error message says. You either need to stay closer to the drone or turn off dynamic home location on this mission plan. Is there a reason you are wanting to use dynamic home location while mapping?
en modo experto aparece desactivado, no se puede activar.
I don’t think I understand your question.
gracias estimado equipo, la opcion que me dice es (desactivar la ubicación dinámica) en mi plan experto, no deja activar o desactivar pero se encuentra DESACTIVADA, igual me encuentro a 3 mts de la ubicacion de despeque, estoy ocupando air 2s con rc pro, y RC-N1, hoy nuevamante problemas, no se que puede ser ? o que otra cosa puedo realizar estimado soporte. hace un bucle conectado y desconectado.
Carlos Figueroa C. This thread is about dynamic home-point so I think there is some confusion. At the end of your comment you said it makes a loop, Connected and Disconnected so sounds like it’s a connection issue. If the DL app is disconnecting and reconnecting then it may be due to the DJI Fly App not being force closed which is required. Go into the devices settings under apps and “Force Stop” the DJI Fly app. You can also change the auto startup to “none” so the DJI Fly app won’t run in the background after the controller is powered up. Swiping up on the screen will not Force Stop the app, it must be done in the settings. Check on how to properly Force Stop the app from number 3.2 in the support link.
https://support.dronelink.com/hc/en-us/articles/360052025194-Why-is-Dronelink-unable-to-connect-to-my-drone
Carlos Figueroa C. If you still cannot get it working then send a screen recording of what the issue is. I suggest using Google drive and sending a link to the video and someone can look at it.
Ya estimado envío video, hoy tuve nuevamente el problema, tanto en Dronelink.com y dji fly
If you’re using an Android OS device and having issues with both apps it’s probably due to not force stopping either app. Read my post above again. You must follow the instructions particularly number 3.2 as I stated. Check in the devices settings and make sure to force stop both apps. Then open just one of them. Anytime you use either app you must go back into the devices settings and force stop that app before opening and connecting the other.
ya estimado soporte voy a realizar las pruebas conforme a sus intrucciones
Please sign in to leave a comment.