Matrice 4 Series (M4E, M4T) Support Overview

  • Updated

Learn about support for the Matrice 4 Series, supported payloads, and how to correctly install the Dronelink app.

A Professional Growth plan is required for these drones.

Important Notes:

  • There is no iOS support.
  • Do not install from the Google Play or Apple App Stores.

What drones are supported?

Supported: M4E, M4T

Not Tested: M4D, M4TD

How to install Dronelink on RC Plus 2?

  1. Visit dronelink.com/download from the RC Plus 2 browser
  2. Select the Matrice 4 Series from the list
  3. Select the RC Plus 2 image to download the APK and install
  4. Make sure to Accept ALL permissions during installation
  5. Force Stop DJI Pilot 2 App when using Dronelink. Learn how to properly close DJI Pilot App.

See the step-by-step installation instructions here.

What payloads are supported?

Supported:

Not Supported:

  • Spotlight
  • Speaker
  • DJI Cellular Dongle 2

Are there any camera or drone command limitations?

All camera commands that are supported are presented in the camera commands menu with the exception of those listed below.

Not Supported:

  • Zoom commands
  • Laser Range Finder commands are not supported.

For thermal commands see section below.

What thermal features are supported?

Supported:

  • Triggering Thermal Camera

Not Supported: 

  • Thermal menus, controls and indicators
  • Sending thermal camera commands

Configure thermal camera settings in the DJI App before autonomous flight.

Other Limitations

  • Laser Range Finder indicators are not supported.
  • Histogram in the flight dashboard is not supported.

Updated Mission Planning Camera Specs

New camera specs have been added for the M4 Series.

Learn about how to Set Camera Specs During Mission Planning to achieve correct overlaps.

Was this article helpful?

0 out of 0 found this helpful