Steve Fines

  • Total activity 42
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 10
  • Subscriptions 12

Activity overview

Latest activity by Steve Fines
  • Steve Fines created a post,

    DJI x7 camera

    Hi, On a mapping mission I select the DJI x7 camera. Planning on using it with an Inspire 2. The only lens option is shown in the screen capture below. There are only 4 lenses made for the x7. They...

  • Steve Fines created a post,

    dji m300

    Hi, Reading through existing posts it sounds as though DL isn't going to fully support the m300 for some time. I get that - it is not a commonly used drone. As a work around I'd like to export some...

  • Steve Fines commented,

    Thanks for the reply.  Yeah - that still gives some jerky camera movements as well. On a set of markers with both gimbal pitch and gimbal direction I'd like it to be able to interpolate smoothly be...

  • Steve Fines commented,

    Thanks Jim - I was sure I tried that but I guess I hadn't. One more marker question - I've revised the path to: https://app.dronelink.com/steve-fines/territory-golf/plan/7wB0MLxDpLTcCn7agTrv/FOjoYc...

  • Steve Fines created a post,

    Marker question

    Hi, So here's a plan to fly a golf course hole: https://app.dronelink.com/steve-fines/territory-golf/plan/7wB0MLxDpLTcCn7agTrv/tZ2KyaauDoqnzyjfDViL   At Marker 1 I point the gimbal down 20deg. The ...

  • Steve Fines created a post,

    Multiple cameras

    Hi, On the DJI M210 I've got two cameras mounted. XT2 and z30. In the past I have used two remote controls each running DJI Pilot on a CS. I can have the thermal image on one and the RGB image on t...

  • Steve Fines created a post,

    Video flight paths

    Hi, When I switch to video the flight path "turn arounds" on the map mode get even more pronounced. Is there a way to make the drone stop right on the limits defined by the boundary points, turn, a...

  • Steve Fines commented,

    Ok - I'll try that. It seems though the overlap on the top photos wasn't 55% or 80% but something much less.

  • Steve Fines commented,

    Sure. Apologies as I thought that just the name would have done that. Here's the link: https://app.dronelink.com/steve-fines/solar-fields/plan/aN3yJBFPZ4sNyDvxoEjO/5a09RSXVacs2JOEFnsSE    

  • Steve Fines commented,

    Here's what the side to side overlap looked like. Looks appropriate.