John Brainerd
Activity overview
Latest activity by John Brainerd
-
John Brainerd commented,
Thank you both. Jim, I understand that it will have to descend (given the ATL/AGL difference), and I'm fine with that. I'm just trying to get clarity on why does it descend after the disengage comm...
- View comment
- 0 votes
-
John Brainerd created a post,
Drone descends first before traversing between two waypoints when linear interpolation is selected
I'm expecting the drone to fly a straight path from each waypoint to the next. In this flight plan, the drone reached Waypoint Alfa, disengaged (I've included that command in the waypoint), then wh...
- John Brainerd
- 4 followers
- 5 comments
- 1 vote
-
John Brainerd commented,
Disengage is what I needed! My test flight worked exactly as I hoped it would. Now I have a workflow for these plans that seems an optimal combination of speed and "clean" and easy to work with (i....
- View comment
- 1 vote
-
John Brainerd commented,
I'll try that. Could I also use it in the waypoint vs a path action?
- View comment
- 0 votes
-
John Brainerd commented,
Thanks. Am I assuming correctly that the disengage component doesn't work in mission preview? Since I'm using Pilot 2 for the pano, I don't need any other functions, but are they necessary for the ...
- View comment
- 0 votes
-
John Brainerd commented,
That's what I did at first, but the flight plans end up too slow that way. I'm using waypoints because of the flight behavior. Checkpoints ascend/descend, then traverse. This is slow, and it requir...
- View comment
- 0 votes
-
John Brainerd created a post,
Using waypoints with Hover to create "Pilot 2 Panorama" mission
This is related to several other posts, but I could use some help making sure I have this buttoned up. I have a regular construction progress job that includes 32 panoramas spread over a large area...
- John Brainerd
- Edited
- 4 followers
- 6 comments
- 0 votes
-
John Brainerd commented,
I am trying to produce an effect like terrain follow, using AGL for my pano altitudes, so using your method, I wouldn't I have to look at the elevations ASL for Pano-A and Pano-B and set the checkp...
- View comment
- Edited
- 0 votes
-
John Brainerd commented,
I was wondering if I could replace the pano component with a waypoint at each location with an action to take a pano. From other reading I've done, I'm imagining that I could do that, and then I co...
- View comment
- 1 vote
-
John Brainerd created a post,
Configure elevation change settings between components on multi-component pano mission?
I have a large number of panos I need to shoot for a large area that has nearly 1,000 ft of elevation change. I've configured a plan with 30+ panos and set each to 100ft AGL. The problem I'm having...
- John Brainerd
- 4 followers
- 6 comments
- 1 vote