4.0.0 (215)
It’s been awhile and I know it’s still a work in progress. Still unable to manually set the Video FR and Res in Modern mode. Also the White Balance has the list of auto WB but no way to input any value. Not a biggie but since all the other main camera settings can be set now I thought I’d mention these two. Patiently waiting. Overall looking really good. 🤙🏼 Thx….l
Comments
7 comments
Those probably aren't going to make the v4 cut.
Mike,216 is out, not tried it yet, just downloaded and installed on android devices
Ok Jim, thx….I’ll wait for V5 ? Lol…..
I’ve Used most of the builds without any big issues overall.
Tried (216) today. It was a smooth air sail with the Evo II. Are flight logs for beta uploaded automatically or if need to share. I think there is something to observe for the 1st and 2nd way points as the app reported that the drone was off course and stopped the mission. There was practically no wind gusts. I had to restart the mission again while the drone was in the air and it worked then. Is this a normal observation?
Was it overshooting the first waypoint and then coming back?
Emmanuel Otchere is your EVO II a V2 model?
This may not be the same issue with his drone but since it was brought up I had a similar issue with my MA2. My issue was after it paused the mission with the off-course error, I hit resume and It just hovered for a long time. Drone was at about 2 mph following a curved path and starting back a straight path with actual measured winds of 3 to 7 mph max during flight. It was directly on the paths line and not going too fast and the altitude indicated it was correct.
Eventually I hit RTH and shut everything down. Started back up and resumed the paused mission and it worked fine. I ran it again recently and no issues. I Checked the motion tolerance just to be sure and it’s set to the default at 75/25 feet. Just curious.
Please sign in to leave a comment.