Problems with mini 4 pro
I have been using dronelink on a mini 2 and no problems. I am now trying to use it on a mini 4 pro and cannot get it to fly a mission. At first message APAS strong signal interference so I changed APAS to brake. Tried to run again and error message P-GPS strong signal interference pops up with showing 2 satellites. Check on DJI fly and 24 satellites. On every use i force stop the dji fly app beforehand. I have tried running dji fly before ( everything ok) shut down fly and start dronelink same problem. If anyone has any ideas much appreciated. Cheers
Comments
4 comments
Hi Lachlan Wilson, you can't use the same version of Dronelink with your mini 4 pro as you did with the mini 2,as they use a different SDK, to get the correct version, click on this link and select the mini 4 pro from the wizard https://www.dronelink.com/download
Thanks for your help. No i am using dronelink dji for the m4p
The question about why the app only shows 2 satellites is more than likely due to your devices font size. The app won’t work with only 2 satellites so I’m fairly sure it’s just the second digit now showing up. Reduce the font size on your device and the second digit should be visible. As far as the OA I’d turn it completely off. Unless you are flying at a very low altitude or very near obstacles it’s not needed. I rarely use the OA because it’s just not necessary 90% of the time. If you’re getting an interference message then it sounds like something is interfering with the signal. The satellites have nothing to do with the communication between the drone & controller which is what the interference message is indicating. Reduce the font size, turn off the OA and try again and report back.
Have now got it working after force stopping apps other than dji fly. Still got the strong signal interference which i ignore. The P- GPS has now gone. Thanks for your help. Cheers
Please sign in to leave a comment.