Skip to main content

smart return home

Comments

6 comments

  • Bob Scheffler

    I figured it out.  I had accidently clicked on the smart return home in the drone control options.  Once this was rectified mission flew fine.

    0
  • Jim McAndrew

    Can you explain further?

    0
  • Arizona Wyldwest

    Yep. That’s the first thing I do is remove the component and see if it runs the mission. If it works then I look into the component which failed and see if I can figure out why and if it can be used in a future mission. I’ve never used that function. I Just either select Return Home or None at end of mission in settings. Many of the features or functions which are listed may not work with a specific drone. Not sure about the Smart Return function or what it does but always works with RTH. 

    😁 Enjoy. Mike……..

    0
  • Bob Scheffler

    I had created a mission a while back and I just keep tweeking it to do different stuff.  I usually choose, in the settings section, "Action on Finish" to Return home.  I was playing with different stuff and I went into "Drone Command" and I must have activated the smart Return Home option.  I figure one of 2 things, or both, happened.  1} You can't have both checked  or 2} The Mavic mini does not recognize this mode.

    0
  • Bob Scheffler

    I shut off the "Return Home" under the "Action on Finish" and turned on the "Smart Return Home" under the "Drone Command" and it flew the whole 13 minute mission until the end when I received the msg. that Smart Return Home failed.  So it appears apparent that the Mini is not capable of handling this command. 

    0
  • Arizona Wyldwest

    👍🏼. Never tried with ether of my drones. I am curious what the difference is. 

    Enjoy.

    0

Please sign in to leave a comment.