Air 2S - dronelink mission issues
Hi Drone Link Crew,
I initially flew my Air 2S drone using the waypoint mission, safely set above the tree line, and successfully captured all the planned photo points. and then ran the mission again to capture the photos, with no issues. I returned to the same location weeks later and was able to run previous missions without any issues. However, when I attempted to re-run the specific mission mentioned above, the drone began trying to start at a much lower altitude, within the trees, and repeatedly attempted to do so each time I restarted the mission.
This has made it impossible to complete the flight, as the drone now wants to descend dangerously into the tree canopy. These photos are very important for a conservation project along a creek line, and it's frustrating that the mission, which previously worked perfectly and captured all the initial images, can no longer be flown correctly.
Im looking at the mission on Dronelink, and is it possible to adjust the height of said photo point to re-run the mission?
Why did this happen?
Are there solutions to my mission issue?
Any relevant information will be greatly appreciated!
Kind Regards, Enviro Steve
Comments
6 comments
Share the plan. Also you can look at any flown mission in the Web app and see how it ran. This way you can compare each one and make sure they are the exact same plan or something didn’t get changed whether by accident or not. There should not be no reason it would run at a different altitude or path.
Unless you took off a different location.
Thanks for the feedback.
How do I share a flight plan?
true. you can over view the mission on web with virtual flight run before you flown on site.
https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans
https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans
Please sign in to leave a comment.