DJI AIR 2S, mission interrupted: "Error stopping camera capture."
This would be my first time using "DroneLink" with my DJI Air 2S drone, using the RC controller with my iPhone 14 Pro. The thing is, the drone started the mission correctly, but then, a little past halfway, it stopped, and the app showed me the following notification: "Camera Stop Capture Failed: Please try again by tapping the play button. If it happens a second time, try restarting the drone. If it keeps happening, you may need to reorder/remove this component or make it not required. Camera Stop Capture | Camera Unavailable".
At that moment, I brought it back home and tried again. It's worth noting that it didn't allow me to resume the mission from where I left off, so I had to restart it from scratch. Upon reaching the same point as in the previous mission, the drone stopped again, showing the following notification the same.
What could be happening? Has anyone experienced the same issue? I would appreciate any advice that could help me resolve it.
Comments
10 comments
You may want to share your plan to see if any problems with improper commands or other issue. Make sure you share as viewer only.
https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans
https://app.dronelink.com/roilan-marrero/geo-drones-plans/plan/wrelT693nxLPKQGAqMpV/afcZlM54LrzPwXCnsqyz
Hi Roilan. The reason the error occurs is due to the second Auto capture you have at the start of the Waypoints component which isn’t needed and it’s set to channel to 2 which won’t work since the A2S only has one camera. Delete that Auto capture and it should work. Almost always best to use all the default settings. Hope that helps. Enjoy.
Exactly what you explained to me!! Thanks for your help, Mike; I owe you one.
Your welcome. Enjoy.
I had a similar message as above. I tried starting the video capture before it reached its first waypoint. It hit the first waypoint and began its mission, but then 50 feet down the line I got the same message above. Tried several times to resume and it did, then backtracked to where it failed first. I just had it return home at that point.
Dronelink
https://app.dronelink.com/davidwiggins/my-first-project/plan/kCtmOUhwVCBEWszjsS6w/RtquK0hoD52UJLcctNUS
I don’t see anything in the plan. Did this only happen once or can it be reproduced several times ? Did you power down everything then try running it again.
I didn't try that. I'll give it another go this afternoon.
Please sign in to leave a comment.