Dissapearing camera stop capture command in verification mode (web app) (Solved)
Ok, so I've got a mission that I intend to fly first in verification mode out in the field, but thought I'd try it first in verification mode in preview in the web app.
The mission consists of a list to start video capture, then a waypoint component, camera stop capture command, then several photos
Mission without verification on, Camera stop capture command present
Mission with verification mode turn on, missing the Camera stop capture command and showing warning triangle
Warning about command missing
Other than this everything behaves as expected in preview, but I'm wondering if this will happen out in the field or if its just a software glitch which to all intense and purposes can be ignored
Comments
2 comments
IIRC, the purpose of the verification mission is to verify that the flight path is safe, not that the camera commands all work. As such, it trips all the commands and flys the path with the drone facing forward so you and the obstacle sensors can confirm safety. If you want to verify that specific commands work, you just plan a separate mission that has camera commands only and you can do it with the drone sitting on your desk.
Sounds fair enough Jim, thought it might be on those lines, flies as expected in the field. I just tried a quick mission
Please sign in to leave a comment.