Dominican Republic
Tried to create a mission in the Dominican Republic but DRONELINK will not save mission I created. It will not save title or description names. It defaults back as New Waypoint Mission for the title and back to an actual Waypoint startup template. Anyone know why this is happening?
Comments
3 comments
Can you describe step by step what you are doing, as I've just knocked this up in the Dominican Republic with No problem
https://app.dronelink.com/martin-reading/public-test/plan/0pa9nq5ajTa3KGuVACag
This has been reported a few times over the years but not that common. Try a dyffenrt browser and see if it will save the changes. I’d suggest using Firefox browser as it has been tested and will work the best. The other thing you can try is deleting all the cache, browser history, cookies etc. Basically absolutely everything to include all off-line website data. Then shut down and restart the device or PC. I’ve had this happen only a few times over the years and it has fixed the issue. It has also been reported by one pilot that restarting their router also fixed the issue but I’ve not needed to do that. Possibly something to do with the ISP stream not clearing out but I don’t know if it’s true. If for some reason you can’t get your Browser to save plans then one temporary solution is once you have created or changed any plan is to Copy it first before closing it. I know this will save a copy in your Repo. It is not a fix but at least for now it will work until you figure out why your sysyem isn’t saving them. Good luck.
One thread regarding this issue:
https://support.dronelink.com/hc/en-us/community/posts/25932809164051-Unable-to-change-settings-or-save-new-mapping-plans-properly-reproduced-on-Mac-OS-14-2-1-and-iOS-17-2-1
So sorry getting back. I moved the purple pin to a different area on the map (100 ft) and it was able to save the mission.
While mission was being planned, no notifications was ever displayed that the planned mission wasn't going to be saved. I only noticed when I went looking for the mission to add components, that it was missing.
Please sign in to leave a comment.