Problem with RTK with Mavic 3 E
Mid air I repeatedly have got following two warnings:
1. "RTK signal is weak. Move to an open area". The area doesn't get more open that 120M in the air over a hill so the satellite coverage was good. The communication between the drone and the remote control was perfect really good so the RTK-corrections should reach the drone without problems. The warning is not easy to understand and I have no idea what is wrong. This warning comes sometimes, last for a few minutes and then disappears.
2. The warning that says that RTK Positioning solution is "Single point". What does that mean?
Håkan Bergstedt/SIC
Comments
3 comments
I had the same issue. Didn't get it figured out yet.
Dronelink just shows the error messages from the DJI SDK. You may want to try using RTK in the Pilot app to see if it gives more detailed error messages. As for the definitions of features such as single point, please refer to the DJI documentation.
@Håkan Bergstedt
Check distance from the station to which RTK drone connects. You may be more than 20km away from all stations and have problems with the correction sent.
Check your RTK subscription website to see where the nearest station is.
Please sign in to leave a comment.