Perda de Sinal entre drone e controle remoto
Olá.
Como o aplicativo se comporta em caso de perda de sinal entre controle remoto e o drone?
O voo continua sendo feito?
Vou usar em um phantom 4 advanced, se não me engano, esse modelo salva o plano de voo na sua memoria interna e mesmo perdendo o sinal e termina de mapear e volta para casa apos terminar
Comments
12 comments
If the drone supports onboard waypoints then you can convert any plan to a DJI Waypoints mission but you don’t need to. So you can use either onboard waypoints or virtual stick method which works fantastic especially with drones which use Ocusync or similar system. If the signal is lost using virtual stick then it will return if that is what has been set in the DJI app for disconnect state. The drone will also RTH when the mission has completed if that is what is set in the DL plan which is defaulted to RTH. Suggest looking through the help section which has a lot of articles to assist you. A few links to assist you.
https://support.dronelink.com/hc/en-us/articles/16733591191571
https://www.dronelink.com/download
https://support.dronelink.com/hc/en-us/articles/4410621290387-Onboard-Waypoints-Converting-and-Running-Missions
Estou tentando realizar uma missão e sempre perdia o sinal entre controle e drone e a missão era pausada, por recomendação desse fórum resolvi converti a missão para dji waypoints e mesmo assim a missão para se ouvir perda de sinal.
Estou usando uma phantom 4 advanced em uma área de 154 hectares.
Procurei no fórum e não achei solução.
If you converted a Virtual Stick plan to a DJI Waypoints mission did you load the correct one in the mobile app. If they are the same name you may have loaded the incorrect one. Also make sure the “Exit mission on RC Signal loss” isn’t switched on.
https://support.dronelink.com/hc/en-us/articles/360036830194-What-happens-if-the-drone-loses-connection
Ambas as opcoes estão corretas.
Tanto a missão de pontos que foi escolhida como a opção “Sair da missão em caso de perda de sinal RC”.
Tentei retomar o voo mas o drone parou e não consegui retomar a missão, tive usar o botão RTH.
Can you share the plan ?
https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans
Boa noite
https://app.dronelink.com/joao-paulo-de-oliveira/jp/plan/9CqpiAkso7QwZOGNeRJx/teY75WBvyLtFvZJyxcp5
I don’t know if there are size limitations like with virtual stick but roughy 154 Hectares, almost 400 acres is a very large map. DL staff may need to assist you. What error message was there when it would not resume ? It may help to know what device you are using as well. Sorry I can’t help more.
Recebi uma mensagem de perda de sinal, depois disso não consegui fazer o drone voltar a funcionar, tiver que usar o botão RTH do controle.
I am not sure I understand the issue - maybe the translation is not coming through very well. Are you saying you upload the mission but it doesn’t finish after signal loss?
I will try to describe the problem using Google Translate to try to improve understanding. I did a mission using the DJI Waypoints option and even then I receive a signal loss warning and the mission is paused and the drone hovers in the air. I try to resume the mission and nothing happens. From what I read on the forum, using the DJI Waypoints option the drone should not depend on the remote control signal.Can you please create a much smaller test mission and see if the problem still happens. If so, send the mission to us and we can try it on our P4.
Vou criar a missão no final de semana e enviar o resultado para vcs.
Obrigado.
Please sign in to leave a comment.