Problem with no full video resolution from Dji Air 2s

July 13, 2023 09:17
6 comments

Hello,
I'm photographing an area with the DJI Air 2s. I use the mapping functionality.
When I shoot with still images I get full resolution 5.4K 5472 x 3648. But when I switch to video I only get 4K resolution 3840 x 2160. Where do I change to full video resolution. There is no choice in settings for mapping.

Comments

6 comments

Martin Reading Dronelink Expert
- Edited July 13, 2023 09:32
You could insert a list before the mapping component that contains these 3 commands:
1. camera stop capture
2. camera mode - video
3. camera video resolution & frame rate - select what you want from the drop downs, making sure that its actually a resolution & frame rate supported by the drone, as if it isn't the mission will fail
Hope that helps, and happy flying
1
Lars Henrikson
- July 13, 2023 10:31
Thanks for a quick reply. It works great. Dronelink is an excellent product

0
Martin Reading Dronelink Expert
- July 13, 2023 10:47
Lars Henrikson, you're welcome, and yes it is a great product, with great flexibility, and plenty of pilots on here willing to help each other

0
Mike (Arizona Wyldwest) Dronelink Expert
- July 13, 2023 17:16
All settings stick across apps so more then likely the last time you flew with the DJI Fly App it was set to 4K. Also the video resolution for that drone is actually 5.4K: 5472×3078 @ 24/25/30 fps. Just make sure you select the correct resolutions and frame rates when shooting video as there are a ton of them in the list and only a few which will work. Same with any other camera settings for photos or video. You can check the drones specs to make sure what will work. Basically the DL app just controls the drone and only what works while using the DJI Fly app is possible with DL. Enjoy….

0
Lars Henrikson
- July 13, 2023 19:28
Thanks for the detailed information

0
Mike (Arizona Wyldwest) Dronelink Expert
- July 13, 2023 20:42
👍🏼

0