Problem in Virtual Stick on M3E
There is a problem in Virtual Stick on M3E and Mavic 2 Pro
When the remote transmitter drops by one signal, it stops or loses its mission
Watch the video of the problem on Facebook
https://www.facebook.com/1757520320/videos/1377529393109900/
Comments
8 comments
That message isn't about signal, it's saying that the drone is too far off of the planned course, I would expect due to high winds as the dashboard was also showing a max altitude reached warning message
Not true, it happened to me on the same site every time
M3E and Mavic 2 Pro
When there is a lack of transmission, the drone deviates from the path sometimes, and sometimes it stops
But with onboard waypoints in Mavic 2 Pro the mission is complete
At the same time Virtual Stick in Mavic 2 Pro and M3E when the signal is weak the drone stop or loses the path
It appears the drone is at the altitude limit set in the firmware. If the mission is trying to command the drone to fly higher but the firmware is disallowing it, you might see this message.
This is M3E I have a fly zone unlock 220 meter
and the mission is 130 meter
in Mavic 2 Pro I don't need fly zone unlock and it's the same problem
I will post the video next week for all drones I have
Other users have reported that only one NFZ can be unlocked at once: https://support.dronelink.com/hc/en-us/community/posts/16687158690579/comments/16713513278611
Please sign in to leave a comment.