Tripletek 8 pro and DJI Mini 3 Pro - Whick APK?

I have the Tripletek 8 Pro running Android 10
I have two drones I would like to use Dronelink with.

The 1st is the DJI Mini 3 Pro - Running on the RC-N1 Dji Controler with the Tripletek 8 tablet as the screen.
     Which APK should I download to run and participate in the Beta?

the 2nd Drone is a DJI Phantom 4 Pro v2.0 with the GL300K Remote with the built-in screen.
    Which APK would I download onto the GL300K to run Dronelink on that?

I do have the Hobby Elite plan with Dronelink.

Any and all help would be appreciated.

 

0

Comments

14 comments

  • Comment author
    Martin Reading Dronelink Expert Dronelink Expert

    For the mini 3 pro, you need to use the Dronelink DJI app, not sure about that other controller

    1
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    The Tripltek 8 may work but struggle with Dronelink. Need a powerful device for it to run properly and the Tripltek tablets are underpowered. Should work but you may encounter problems so give it a try and see how it handles the App. The P4P V2 and that controller will work. Check the links for more info and what you should download as there may be several ways when using an Android OS device. 

    https://support.dronelink.com/hc/en-us/articles/360025829933-What-are-the-system-requirements-Supported-drones-and-devices-

    https://support.dronelink.com/hc/en-us/articles/15304402363411-Mini-3-Mini-3-Pro-Beta-Support-Overview

    https://support.dronelink.com/hc/en-us/articles/360035825593-How-do-I-install-the-Dronelink-mobile-app-

    1
  • Comment author
    Dwight D. Godwin

    Thank you. I am not sure how you figure the Tripletek 8 Pro is underpowered. It is an Ocracore processor that runs faster than my desktop computer, but I will take your word for it.
    Thank you for the links. I have read through most of them already and I just get confused.

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

     

    Just going by others which have used the Tripltek. As I mentioned it may work but many others have stated it struggles at times. An 8 core processor doesn’t mean it will process everything fast. There is a lot more to it then just that. There is a ton of help available for DL and I’d suggest bookmarking the main page. 

    For Mini 3 its Only in Beta at this time so you will need to follow the instructions on joining Beta in the link. 

    https://support.dronelink.com/hc/en-us/articles/15304402363411-Mini-3-Mini-3-Pro-Beta-Support-Overview


    For the P4P V2 with your controller check this one. 

    https://support.dronelink.com/hc/en-us/articles/360025829973-How-do-I-install-the-Dronelink-app-on-Remote-Controllers-with-Screens-DJI-monitors-

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    Any update on you getting your P4P V2 set up Dwight ? Did that link help ? 

    0
  • Comment author
    Dwight D. Godwin

    Hi Mike, thank you for asking.

    I haven't tried the P4PV2 yet. I started with the mini3pro for beta testing.

    Hopefully I will get to the P4P this week.

    I am.older and tend to have to read through things several times before I "get it"..

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    Ok Dwight. As an older man I understand. Lol…  Plenty of help here so ask and someone can assist. I sent a link on how to share your plan on other post. Good luck. 

    0
  • Comment author
    Dwight D. Godwin

    Tried putting Dronelink on my GL300K RC today.  Seems I have to have Google Play store to do that.

    I tried using APK Pure and it installed GooglePlay store.  But it keeps crashing and I can't put DL on the RC.

     

    Tips?

     

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    Seems I have to have Google Play store to do that.

    Dronelink can always be installed by the APK directly if you desire.

    I tried using APK Pure

    There is no need for this as you can download the APK directly from us.

    0
  • Comment author
    Dwight D. Godwin

    Thank you Jim. I will try that today.
    Funny, the DL article I read was where it told me to download Google play first to get DL on the GL300K RC

    0
  • Comment author
    Dwight D. Godwin

    Jim, the other issue I ran into with the native browser on the GL300K RC was that when I went to the DL site and signed in, I tried to download the apk. I got the error that ny browser was no longer supported.
    I tried to update the browser, no luck, it Saud I had the katest version. It also would not let me down load Chrome.

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    I got the error that ny browser was no longer supported.

    Do you have a screenshot of this?

    0
  • Comment author
    Dwight D. Godwin

    Okay, I have several screenshots I just took - I am sending several

    1st is my Built-in screen showing the full OS.

    Then screenshot of the "native Browser that came on the RC

    The rest are the screenshots showing the error I get.  There are multiple photos because the text is so large I had to scroll and shoot.

    No matter which "Free" browser I select, none of them open a download to install it.

    Hope you can help.  I am so frustrated with this.

    Thank you,

    Dwight

     

    0
  • Comment author
    Dwight D. Godwin

    Pics got reversed, So scroll up from bottom to see the right order

     

    0

Please sign in to leave a comment.