Update on Support for Autel Evo II 6K Pro V2 Enterprise RTK and Autel Evo II 6K Pro V2 Enterprise Dual FLIR 640R

• 

  Emmanuel Otchere

  • December 14, 2022 03:46

  I've got both the II V2 Pro and 8K and DL works with both. Only a few points you need to watch out for, and these are captured in the reading notes. It requires you to update your settings and you can get to it here - https://support.dronelink.com/hc/en-us/articles/8293359753491-Autel-EVO-II-Series-Support-Overview-and-Limitations.

  Also, I recommend a few other changes in your settings, in your stock Autel App, change the frequency selection to Auto before switching back to DL. You also need your camera settings sort of done in the stock app before switching to DL. These tips are based on my last experience using the Autel Evo II. 

  Am waiting for the day all the settings can be set as a profile in DL and passed to the drone when armed. Until then, I guess we have to stick with the recommendations in the support notes. 

  0
• 

  Felipe Bravo

  • July 18, 2023 19:44

  Hi, i have EVO II RTK and Pro, can your Evo II Pro make inspection facade? or do 3d modelling of vertical structures with dronelink?

  0
• 

  Mike (Arizona Wyldwest) Dronelink Expert

  • July 18, 2023 21:16

  Check this link which is the same as above. It will also depend on which plan you purchases as not all plans have same functions.

  https://support.dronelink.com/hc/en-us/articles/8293359753491-Autel-EVO-II-Series-Support-Overview-and-Limitations

  Pricing structure and functionality.
  https://app.dronelink.com/pricing

  0

Please sign in to leave a comment.