Point Of Interest

Hi,

Newbie here. I can't seem to keep the point of interest at the center of the orbit during takeoff before it reaches the target altitude.

But once it reaches the target altitude, the POI will shift to the center of the orbit.

Please help.

6 comments

Martin Reading Dronelink Expert
- October 21, 2022 10:47
Can you share the mission, generally speaking capture doesn't start until the target altitude is reached, however it looks as though you've a camera command right at the start as compared to a usual set up as in my screenshot below

0
Jim McAndrew Dronelink Staff
- October 21, 2022 11:26
You need to put a POI on the Orbit Start component inside of the Orbit.

0
Lamberto J. Austria
- October 22, 2022 00:38
Hi Jim,

I did the POI. But it's still way off. Not sure what I'm doing wrong.
```
https://app.dronelink.com/lamberto-j--austria-jr-/test-command/plan/YHFIOfRgRY70flzriczu/NhRJWmzdvRQUnmhNp97K
```
0
Jim McAndrew Dronelink Staff
- October 22, 2022 01:06
The POI actually needs to be on the Orbit Start component inside of the Orbit component.

0
Barry Houldsworth Dronelink Expert
- October 22, 2022 01:07
Lamberto J. Austria

Where the cursor is it is still setting up for the orbit. Play it past the orbit start block and it will swing into the center.

0
Martin Reading Dronelink Expert
- October 22, 2022 01:18
Take a look at this, it does what you're after

https://dronelink-225116--beta-xctf3fho.web.app/martin-reading/beta-4/plan/R0WHpobFYivJfh54IJ25

0