Automatic Capture is the easiest way to capture video or continuous photos. Automatic capture is set to video by default for both the Waypoint and Orbit template missions.
Video or photo capture begins at the start of the Mission Component and ends when the component is finished.
It is possible to turn off Automatic Capture, or select between Photos and Video.
Automatic Capture | Photos sets the camera to take continuous interval photos every 2s.
The Automatic Capture Setting can be found on the Mission Component Settings. Select a mission component from the list or on the map to open the settings.
When Automatic Capture is enabled for a Waypoints mission component, each individual Waypoint will display that Automatic Capture is enabled. If Automatic Capture is not displayed, there is no automatic capture enabled.
You can also select "Automatic Capture | Video" to open and edit the setting.