Upload images to Pix4D Cloud

  • Updated

You can send images from the web app to PIX4Dcloud. PIX4Dcloud makes maps and 3D models from the images. For the general steps of an upload, read Uploads: send images to processing and storage services.

What you need

  • A PIX4Dcloud account. To make one, click the icon at the right end of the Pix4D Cloud row in the New Upload dialog. The Pix4D site opens in a new tab.
  • Pix4D processing credits on your Pix4D account. Processing in PIX4Dcloud uses these credits.
  • A computer browser at app.dronelink.com.
  • A plan that includes this integration. To see which plans include it, find "Pix4D cloud" in the plan comparison table.

Connect your Pix4D account

The connection leaves the web app for a short time. If an upload is active in this tab, wait until it is complete before you connect.

  1. Open Uploads and click New Upload.
  2. Click Pix4D Cloud.
  3. Click Connect Account. The Pix4D sign-in page opens in the same tab.
  4. Sign in to Pix4D, and allow Dronelink to use your account.

Pix4D sends you back to the web app. The New Upload dialog opens again at Configure Settings, with Pix4D Cloud selected.

The Access Token field shows that the account is connected. Pix4D sets how long the connection stays valid. When it expires, Connect Account shows again. To disconnect the account in this browser, click the clear icon in the Access Token field.

Settings

  • Project Name: the name of the new project in PIX4Dcloud. Each upload makes a new project.
  • Acquisition Date and Time: the date and time when the drone captured the images. The default is the current date and time. If you start the upload from a mission page, the default is the capture time of the mission. The default Project Name is then the mission name.
  • Template: the Pix4D processing template. This field is necessary. Select 3D Maps, 3D Models, Ag Multispectral or Thermal Camera. To use your own template, select Custom. Then drag your template file onto the box "Drag a template file here, or click to select". The file name must end in .tmpl. The box does not accept other files.
  • Automatically Start Processing: when this option is selected, PIX4Dcloud starts to process the images after the upload. Processing uses your Pix4D credits. The option is selected by default. If you must add ground control points (GCPs), clear this option.

The Pix4D Cloud settings after Connect Account

What happens during the upload

  1. The web app makes the project in PIX4Dcloud.
  2. The browser sends the images directly to the Pix4D storage.
  3. The web app adds the images to the project and sets the template.
  4. If Automatically Start Processing is selected, the web app starts the processing.

The progress can show 100% before steps 3 and 4 are complete. The card stays active until the web app starts the processing.

The web app sends its requests to PIX4Dcloud through a Dronelink server, because Pix4D accepts these requests only from a server. This server uses your Pix4D access for each request and does not keep it. The images do not go through Dronelink.

A file name in Pix4D gets a number before its extension, for example DJI_0001_0.JPG. This keeps images with the same name from two folders apart.

After the upload

Open PIX4Dcloud and find the project by its name. The upload card does not have a link to the project.

  • If Automatically Start Processing was selected, PIX4Dcloud shows the processing status. If your account has no credits, the project waits for credits.
  • If you cleared the option, add your GCPs in PIX4Dcloud. Then start the processing in PIX4Dcloud.

Troubleshooting

  • "Could not connect to Pix4D. The upload did not finish. You can upload your files directly in PIX4Dcloud.": the web app could not reach Pix4D. Start a new upload, or upload the files in PIX4Dcloud.
  • "Error: Upload failed" or "Error: Upload failed with status" and a number: an image did not get to the Pix4D storage. Start a new upload.
  • Other error messages: most come from Pix4D. The card shows the message below the settings.
  • One file failed: the upload stops. Start a new upload. The web app makes a new project for it.
  • A failed or stopped upload: the project stays in PIX4Dcloud, but it does not show the images. The web app adds the images to the project only after all images arrived. Delete the project in PIX4Dcloud.
  • Connect Account shows again: the connection expired. Connect the account again.
  • The upload fails at the start: Pix4D can end the connection before it expires. Click the clear icon in the Access Token field, and connect the account again.
  • Too many requests: if Pix4D asks the web app to wait, the web app waits and tries again.

Was this article helpful?

0 out of 0 found this helpful