Aerial Survey
https://sketchfab.com/vakexpert/collections/aerial-photogrammetry
Comments
Recent activity by Aerial Survey
-
WebODM settings: auto-boundary:true, dem-resolution:0.3, dsm:true, orthophoto-resolution:0.3, pc-quality:highI believe for AI mine detection the DPI of the orthophoto should be similar to the DPI o...
- View comment
- 0 votes
-
The front and side overlap is 70%. To reduce on orthophoto creation time I want to experiment lowering the overlap.My new PC: CPU - AMD Ryzen 9 7900X Ram - 32GB G.Skill Flare X5 F5-6000J3238F16GX2...
- View comment
- 0 votes
-
I believe I finally managed to produce decent images Setting and flight: https://youtu.be/5t3YC_TxF8c I also create the Orthophoto using WebODMOrthophoto: https://youtu.be/LW8DmbJoQmMOrthophoto as ...
- View comment
- 0 votes
-
10 meters was recommended by de-mine.com. I don't know about specific drones and their optimum altitude.
- View comment
- 0 votes
-
Seppo Maybe this research is of interest to you https://www.mdpi.com/journal/remotesensing/special_issues/V6D07666X5
- View comment
- 0 votes
-
First time flying with Dronelink Inspection. It seems to do the trick.I dont know if the photos can be sharper than this.https://we.tl/t-QoPi6BdXIG https://youtu.be/VcBQf3j1BTE Shutter was still at...
- View comment
- 0 votes
-
Thanks again GeorgesI will continue to fly at 10 meters. The recommended altitude by de-mine.comPFM-1 butterfly mines are very small, we need good detail for the AI to detect them
- View comment
- 0 votes
-
Thanks again for all the tips. I use a Samsung A52 RAW photo's: https://we.tl/t-joCogFc4BL In the DJI GO 4 app I just set the camera into S mode and the shutter to 1/160. Would this be too fast to ...
- View comment
- 0 votes
-
Just back from test nr 3.Now even more photo's are unsharp.Part of the mission https://youtu.be/T9ikWh8cdTYI may have to switch to other software where the drone does not move while taking the phot...
- View comment
- 0 votes
-
I changed the settings to the recommended on the mission planhttps://app.dronelink.com/aerialsurvey/my-first-project/plan/wKWbgiUcFGTHBKzNGMgMI intend to fly again tonight.
- View comment
- 0 votes