Luko
Comments
Recent activity by Luko
-
James turn on drone; fly at the altitude you have decided to fly; look down with camera; select camera PRO mode; sets shutter speed from 1/500 to 1/2000 based on light and cruising speed; touch a p...
- View comment
- 1 vote
-
David Terrazas if you press on the purple signal the curtain opens with the departure and return speed. Before starting the flight plan set the camera to minimum 1/1000 and ISO100. in this way at ...
- View comment
- 0 votes
-
until January 2024 everything worked fine with Phantom 4 pro v1.then I changed drone with an Air2S and DL that I was already using for Air2.
- View comment
- 0 votes
-
georges GSP is as old as APP uses DJI PILOT. with Phantom 4 pro you can use the DJI Pilot 1 Android app.It is written only for Phantom RTK but also works very well with all its brothers in the P4 s...
- View comment
- Edited
- 0 votes
-
Dji Pilot 2 and Dji Terra. Dji Pilot 1 gratis only Dji Phantom series for mapping.
- View comment
- Edited
- 0 votes
-
georges Unfortunately Phanto Pro and DL don't go together very well.my Phantom Pro V1 also had photo routing and location issues.The situation improves with DL if you use waypoint map conversion.Wo...
- View comment
- 0 votes
-
@Håkan Bergstedt Check distance from the station to which RTK drone connects. You may be more than 20km away from all stations and have problems with the correction sent.Check your RTK subscription...
- View comment
- Edited
- 0 votes
-
Charles LeRette the Phantom 4 is an excellent drone but has now been surpassed in performance by the Mavic series. I tried the P4P for this job because it had a mechanical shutter. But for me it wa...
- View comment
- Edited
- 0 votes
-
if you use shutter at 1/1000 there is no blurred photo problems. with any drone. I tested the yield is the same between Air2 and Phantom 4.
- View comment
- 0 votes
-
You can use camera in manual but you cannot fly fast. I mapped 300 hectares at 36kmh and 100m altitude with photos without movement. if you use automatic use shutter speed too low to go fast.
- View comment
- 0 votes