Mavic Mini Video/Photos Mission Problem

Edited June 18, 2022 21:09
2 comments

I'm trying to set up a simple waypoint mission for video and then photos with manual camera settings for a DJI Mavic Mini. I don't receive any error messages for the mission components, but when I start the mission the drone hovers a few feet and then cancels the mission. Any help is appreciated.

Here is a link: https://app.dronelink.com/matthew-shields/costar/plan/5s9zVH5NgYXAceSqv20d/bFSjHoFwv353OWN2GVSS

Comments

2 comments

Ken Kroeker
- June 18, 2022 21:16
Try changing the camera components that are default for the mini to be not required or eliminate them entirely.

0
Mike (Arizona Wyldwest) Dronelink Expert
- Edited June 18, 2022 23:36
You may need to remove the Camera Exposure Compensation. My MA2 can’t utilize the EV adjustment when shooting videos in manual exposure mode and probably the same for the Mini’s. You can only adjust the EV when in auto mode for videos. Not sure why DJI doesn’t allow EV adjustment ,(MM value) in the DJI app for videos using manual exposure mode. I’ve tried a couple missions with a EV command added to a plan with videos and it fails. In general, if it can’t be performed in the DJI App then DL usually won’t be able to perform it. Try removing the EV command only and try again.

0