mini 4 Pro Mission issues
I have many mission failures trying to do a simple map component ortho grid. Photo Timer Interval in Seconds fails. The Interval mode can be set and captures at the previous interval in the drones memory, but dont try to change the seconds via a command. The big failure was that the map to real world positioning was off by about 6 feet. Need to snap the Dronelink map component into GPS reality via my own POI mark (manually). I researched this and found a reference to "Move Marker to Drone Position", so hover over a fixed point and then resync the map to that point, but I couldnt find that option in flight. Guessing another way is to set manual points in the map component from a surveyors aerial markers on a property GCPs, or from flying over the corners to get the GPS coordinates. The Orbits had the same issue where the POI on the droneline planning map was about 10 feet west from reality. Is there another way to make this easier?
Comments
1 comment
Standard GPS is not that accurate. It can be off by several meters.
If you want accurate you need RTK or use GCPs.
https://youtu.be/HM_54pxfD7s
Also if mapping is not working in seconds you need to turn off raw photo capture. You don't need raw for maps.
Please sign in to leave a comment.