Can I take off from within Dronelink?
I've got an Air2S and before I could do a mapping missing, it wanted to calibrate the camera focus. There was some issue in trying to get that happening. I forget what it was but essentially I couldn't progress, so I thought I'd try taking off and then try to calibrate the camera but there's no clear way on how to do that.
Is there a button, or a stick combination that will allow me to take off and fly the Air2S through the dronelink app? A forum post here suggested both sticks down which does not work. The map box in the bottom left corner below is usually looking at the right place but I had been switching between phones to try and get something to happen and occasionally the map freaks out in the process.
Comments
4 comments
You can start and fly with DL manually just as with DJI app. The sticks need to be pulled down and inward just like with the DJI app, not just down. Also up and inward will work so either way will start the motors and then Fly as usual.
Thank you so much! I was able to get into the air and fly about. Turns out the focus calibration issue was from me trying to use a focus component but without that in there, it took off and flew the mission on its own.
😀🤙🏼
I always think it is cool to be on the ground and start the mission and have it take off, think for a moment then get to work!!
Please sign in to leave a comment.