Manual mission interruption

• 

  Jim McAndrew Dronelink Staff

  • January 11, 2022 20:13

  How would one stop or pause a mission

  https://support.dronelink.com/hc/en-us/articles/360036830214-How-do-I-take-over-control-during-a-mission-

  then resume at the stop point

  When you press the play button after stopping a mission, Dronelink automatically handles the resuming.

   

  0
• 

  Barry Houldsworth Dronelink Expert

  • January 11, 2022 20:34

  There are several ways to manually interrupt a mission.  The most common are:

  • Manually switch to a different mode on the controller (e.g. sport or Tripod)
  • Press the pause button on the controller
  • Press the pause button on the screen   

  Any time you stop a mission and restart it, Dronelink will automatically resume from exactly where it left off.  

  I'm glad you mentioned that you want to adjust settings.  If you included camera settings in the mission, those will be reapplied when the mission resumes.  So make sure that anything you might want to change is not included in the mission.

  Hope that helps

  0
• 

  norman ziegelmeyer

  • January 11, 2022 21:45

  Thanks Barry

  0
• 

  norman ziegelmeyer

  • January 11, 2022 21:48

  I assume I can rotate drone and adjust the gimbal after pausing and when I resume DL will readjust to match pause spot settings?

   

  0
• 

  Barry Houldsworth Dronelink Expert

  • January 11, 2022 21:59

  I assume I can rotate drone and adjust the gimbal after pausing and when I resume DL will readjust to match pause spot settings?

  Correct.  

  0

Please sign in to leave a comment.