Use POI AND gimbal pitch simultaneously
Hi, I want zu set a POI and also move down the gimbal some degrees. First I set the POI as command in a marker. But when I try to add a command für the gimbal pitch, the POI connection is lost. Only with the POI as command I have too much heaven. What can I do? Thank you!
Comments
3 comments
The POI function keeps the camera pointed at the POI for both drone heading and gimbal pitch.
If you have too much sky I would recommend changing the altitude offset, which should adjust the point the camera focuses on up or down.
Okay, thank you. I thought to do something wrong :)
Hi Tom. Also for future reference you can change the pitch when using an Orbit. Click on the orbit component and add a gimbal pitch. Then it will indicate what the value is already set to based on the orbits altitude and diameter. Increase pitch up for more above POI or decrease for more ground. Maybe this will help in future plans.
Good luck, Mike….
Please sign in to leave a comment.