Hi, on Mavic Air 2, I have a problem with two different "component-commands":
(1) "camera photo file format" which I would like to set to "RAW + JPG".
The app includes the "JPG + RAW" command which if set manually works ... but, if inserted at the beginning of the mission, sending the command fails 3 times out of 4.
(2) "camera white balance preset": also in this case, the manual control via the app works but does not work if inserted between the commands of a mission.
PS "white balance preset" works.
Could you give me further clarifications for both problems encountered? Thanks Marco
Comments
1 comment
JPEG+RAW: I’ve had the same issue since using DL when it became available last year with my MA2. Just use Raw only. Don’t really need both anyway as long as you have RAW data photos. Not sure why it won’t save both but It may be due to the SDK DJI wrote which didn’t add this into it. (Just a guess tho)
Just use the Camera White Balance Custom. The MA2 can only perform what it is capable of doing in the Fly app.
There are many commands in DL which will not work on every drone. Most of them will work as long as the specific drone your using is capable of performing it.
Examples: The Mavic Mini can’t record 4K video and you can’t change the aperture on the MA2.
Hope this helps. Enjoy Mike…….
Please sign in to leave a comment.