How can I use Dronelink with Phantom 4 Pro+ (GL300E)? I tried GL300C and GL300F but couldn’t connect

June 04, 2025 07:50
3 comments

Hi, I have a Phantom 4 Pro+ drone with the integrated display controller (GL300E). I understand that Dronelink does not work directly on the GL300E due to the restricted system. To work around this, I tried to use other controllers—specifically GL300C and GL300F—so I could run the Dronelink app on my phone. However, I was not able to successfully link my Phantom 4 Pro+ with either of these remotes. The drone did not respond during the linking process. Has anyone successfully used Dronelink with the Phantom 4 Pro+ by switching to a different controller? If so, which controller worked for you, and were there any special steps needed to link it? Thanks a lot in advance!

Comments

3 comments

Mike (Arizona Wyldwest) Dronelink Expert
- June 04, 2025 15:39
Zendesk is stopping me again from sending links to DL support pages. Frustrating. Anyway, If you go to the Dronelink download page and select the drone it will indicate which devices are supported.

0
Mike (Arizona Wyldwest) Dronelink Expert
- June 04, 2025 15:39
https://www.dronelink.com/download

0
Mike (Arizona Wyldwest) Dronelink Expert
- Edited June 04, 2025 15:41
Here is a screenshot.

0