Unable to take Control (just with Mavic Air 2)
I flew my Mavic Air 2 many times with Dronelink and had no Problems in the Past. But now, just my Mini 3 Pro is working with the same Plan, the Air 2 does not. It starts the Mission and goes about 7 Meters up in the Air, hovers a while and then the Message "Unable to take Control" comes up. As sayd: the Mini 3 Pro does work! What SDK is required to make it work again? Can both Drones work on the same Controller (by switching)? The Mode is always on N, but Dronelink thinks it is not. (Make sure it is in "N" Mode)
Additional Info: No no Fly Zone and nothing near by that prevents the Mission!
Solved: The older Version (without LLC) must be completely removed and then the LLC-Version installed...
Comments
1 comment
Just a bit more info. Those two drones use a different Dronelink version. The MA2 uses the “ Dronelink” version which can be downloaded from the Apple Store if using a IOS device. If using an Android OS device the Mini 3 uses “Dronelink DJI” which needs to be downloaded directly from the Dronelink site, not Google Play. So if using an Android OS device then you will need two versions installed. “Dronelink” for the MA2 and “Dronelink DJI” for the Mini 3. You can have the two versions but only one will work with the correct drone. Hope that helps. Enjoy.
Please sign in to leave a comment.