Mini 4 Pro missions

Scott
Recently tried out the new mini 4 pro version and wasn’t able to get any gimbal command to execute that involved a positive angle gimbal command. I.e. shooting a pano all negative angle shots work fine but anything above 0 fails with SDK_SERVICE_GIMBAL_ROTATE_PITCH_OUT_OF_RANGE Any suggestions?
1

Comments

12 comments

  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    Hi Scott. I don’t have that drone to test the Pano. Only suggestion I have is to check the DJI Fly app and make sure the upward ability is enabled. If is then DL will may need to test one of there Mini 4’s to see if there is an issue. DL may want to know what device you are you using as well.

    0
  • Comment author
    Scott

    Upward ability isn't something you enable, it's native functionality.

    Anyone from dronelink able to comment? 

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    We asked DJI about this but they haven’t responded yet.

    1
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    As I said, I don’t have that drone so If there is no enable feature then that’s something newer. My MM, MA2 as well as older drones do have a switch to enable upward gimbal movement. Just trying to help. Enjoy.

    0
  • Comment author
    Scott

    Upward gimbal moment isnt locked on any DJI drone to my knowledge (that would make the drone relatively unusable in forward flight). Some allow you to lock roll. Dronelinks response seems to indicate this is simply a bug with the DJI API.

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    My MA2 does have a switch to allow upward gimbal rotation in the Fly app which is why I mentioned it. Seems like it’s the older (legacy drones) as they are now called have this so you must not own one. Hopefully DJI will respond to DL with an answer as to why it won’t go above 0° pitch but who knows when. Good luck and enjoy.

    0
  • Comment author
    Garikoitz Beobide Brit
    • Edited

    Dji mini 4 pro / dji rcn2 / Android 

    https://photos.app.goo.gl/VeR6KprhNNqXY46L9 

    Error de cámara Iniciar captura

    • Vuelva a intentarlo tocando el botón de reproducción.
    • Si sucede por segunda vez, intente reiniciar el dron.
    • Si sigue ocurriendo, es posible que deba reordenar/eliminar este componente o hacer que no sea necesario.

    Cámara Iniciar captura | NO SE PUEDE INICIAR UNA TAREA CON GPS DÉBIL

    0
  • Comment author
    Barry Houldsworth Dronelink Expert Dronelink Expert

    I tried this for the first time today with the same results - trying a 360 pano which involves pointing the camera up at 12 deg and I get 

    Gimbal Orientation Failed: • Please try again by tapping the play button. • If it happens a second time, try restarting the drone. • If it keeps happening, you may need to reorder/remove this component or make it not required. Gimbal Orientation | Pitch 12° | SDK_SERVICE_GIMBAL_ROTATE_PITCH_OUT_OF_RANGE

    Any update on this issue?

    0
  • Comment author
    Scott

    It’s been 5 months since I reported it, and no one has responded, so I doubt it is going to be looked at.

    0
  • Comment author
    Barry Houldsworth Dronelink Expert Dronelink Expert

    It seems the issue is with the SDK, so I guess we are waiting on DJI to correct it.

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    Yes.

    0
  • Comment author
    William Saavedra

    Hola a todos, hace poco compré la aplicación de Dronelink y la instalé en el teléfono (iPhone 13 y Huawei p30 en ninguno dió imagen y aparecía un aviso que decía telemetría no disponible)

    Hice los pasos que dicen que se deben hacer, conectar control y drone, primero abrir dji Fly, luego cerrar y abrir Dronelink y lo hice un montón de veces, revisé vi figualraciones y nada, revisé actualizaciones y nadaaaaa aún no da imagen le dio comentar control desde la aplicación y pitan y la luz da color amarillo pero no da imagen.
    Alguien por favor me puede indicar qué puedo o debo hacer ???
    Gracias

    0

Please sign in to leave a comment.