Mini 4 Pro missions

Scott
Recently tried out the new mini 4 pro version and wasn’t able to get any gimbal command to execute that involved a positive angle gimbal command. I.e. shooting a pano all negative angle shots work fine but anything above 0 fails with SDK_SERVICE_GIMBAL_ROTATE_PITCH_OUT_OF_RANGE Any suggestions?
0

Comments

7 comments

  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    Hi Scott. I don’t have that drone to test the Pano. Only suggestion I have is to check the DJI Fly app and make sure the upward ability is enabled. If is then DL will may need to test one of there Mini 4’s to see if there is an issue. DL may want to know what device you are you using as well.

    0
  • Comment author
    Scott

    Upward ability isn't something you enable, it's native functionality.

    Anyone from dronelink able to comment? 

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    We asked DJI about this but they haven’t responded yet.

    1
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    As I said, I don’t have that drone so If there is no enable feature then that’s something newer. My MM, MA2 as well as older drones do have a switch to enable upward gimbal movement. Just trying to help. Enjoy.

    0
  • Comment author
    Scott

    Upward gimbal moment isnt locked on any DJI drone to my knowledge (that would make the drone relatively unusable in forward flight). Some allow you to lock roll. Dronelinks response seems to indicate this is simply a bug with the DJI API.

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    My MA2 does have a switch to allow upward gimbal rotation in the Fly app which is why I mentioned it. Seems like it’s the older (legacy drones) as they are now called have this so you must not own one. Hopefully DJI will respond to DL with an answer as to why it won’t go above 0° pitch but who knows when. Good luck and enjoy.

    0
  • Comment author
    Garikoitz Beobide Brit
    • Edited

    Dji mini 4 pro / dji rcn2 / Android 

    https://photos.app.goo.gl/VeR6KprhNNqXY46L9 

    Error de cámara Iniciar captura

    • Vuelva a intentarlo tocando el botón de reproducción.
    • Si sucede por segunda vez, intente reiniciar el dron.
    • Si sigue ocurriendo, es posible que deba reordenar/eliminar este componente o hacer que no sea necesario.

    Cámara Iniciar captura | NO SE PUEDE INICIAR UNA TAREA CON GPS DÉBIL

    0

Please sign in to leave a comment.