Error en el vuelos Mini 3 pro
Al momento de realizar la misión el dron se desconecta de la planificación y se muestra en pantalla el siguiente aviso:
Dron fuera de curso:
El dron esta demasiado lejos de la ruta de vuelo planificada
- Vuelva a intentarlo tocando el botón de reproducción. (sigo la indicación pero vuelve y sucede)
- Si sucede por segunda vez, intente reducir la velocidad de este componente( bajo la velocidad a 1,10,15,20 y ninguna funciona)
- si sigue ocurriendo, es posible que deba esperar a que baje el viento o planificar su misión a una altitud mas baja ( el viento no estaba fuerte y la altura era de 60 m)
Este error me viene sucediendo en diferentes ocasiones lo cual impide el desarrollo de los vuelos, por tal motivo espero me puedan ayudar gracias.
Comments
2 comments
How fast are you asking the drone to fly?
If the drone cannot reach the speed it is expected to fly it will fall behind the plan and, if that gap becomes too far, it will stop with that message.
Remember that the drone flight speed needs to take into account wind. So if the drone is being asked to fly at 25mph, but the headwind is 20 mph, it probably cannot reach that speed and the mission will fail.
If you go into the advanced planning mode there is an option to enable high wind tolerance - you should turn that on and see if it solves your problem
Other than what Barry stated I would not set the speed greater than about 15 mph. All Mini’s struggle with wind compared to a larger more powerful Air series or Mavic Pro series. https://support.dronelink.com/hc/en-us/articles/360052533153-Why-does-the-drone-fly-off-course-or-make-jerky-movements-during-certain-mission-plans
Please sign in to leave a comment.