In pano mission, it automatically switches from Manual Exposure to Auto
I just got DroneLink for a Mavic Mini 3. Whenever I try to do a pano in a mission it switches from manual exposure to auto (and I did force-stop DJI Fly before using DroneLink). It then exposes the shots in the pano differently which makes it harder to stitch and results in noticeably lower-quality stitched images. I watched all the tutorials and experimented with different things. I thought I found a way to fix this when adding a pano to a mission by changing Camera Exposure Mode under Departure to Manual. But it still switched to auto before taking the images. I also tried auto exposure with auto exposure lock to keep the exposure from changing from shot to shot. But about halfway through, it unlocked itself and started changing the exposure. Is there any way to keep the exposure in manual mode during the entire pano mission?
Comments
2 comments
The pano component is all about auto everything. If you want fine grained control, roll your own like this: https://app.dronelink.com/dronelink/core/component/TG5zYSiJLtfS4CA6JBxb
Thank you. I figured this out.
Please sign in to leave a comment.