Mavic Air 2

Niles Simmons

When hvil the software be ready for the Mavic Air 2?

Regards Sisu

0

Comments

59 comments

  • Comment author
    Brad

    It works!!!  At least for me on my MA2 with a Samsung GS9.  I was able to run a simple mission (2 orbits) and it worked flawlessly.  I'm going to play with some progressively more complex missions over the next couple of days...  I've been waiting for this since my drone arrived last May.

    Thank You!!

    -Brad

    2
  • Comment author
    Jim McAndrew Dronelink Staff

    137 (beta) is now available on Google Play.

    2
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    Hi Ninja. I’m a newbie and this is my first mission app. It takes some time learning the basic setup but once you watch a bunch of the tutorial videos on YouTube it gets easier. I spent a little bit of time over about three weeks and figured it out. Once you have the basics down it just depends on how much of its abilities you want to utilize. I purchased the Hobbyist $40 Premium plan. The basic doesn’t really cover much so I purchased the premium plan which covers more then I need and the few more features in the Elite plan isn’t needed at this point. You can always upgrade in the future if you like it. Good luck.  Hope this helps Ninja.

    Mike.....

    1
  • Comment author
    Jim McAndrew Dronelink Staff

    You have to do this:

    1
  • Comment author
    Jeferson Pessanha

    Hello. The photos with 48MP of MA2 are made by software, and require a time of processing, which I don't believe is possible during mapping missions. I think I...

    1
  • Comment author
    Jim McAndrew Dronelink Staff

    Triggered capture in maps in on our roadmap but we don't have it prioritized at the moment.

    1
  • Comment author
    Denis1807

    Hello Alexander,
    Is possible for you to make a little tutorial step by step on how to set this mission? I need to make a 48Mpix mapping, and I have tried to follow your suggestions without success. I'm sure I skip some steps.

    Thanks a lot for your help.
    Denis

    1
  • Comment author
    Jim McAndrew Dronelink Staff

    It mainly depends on when DJI fixes their issues, which they do not give us a timeline on.

    0
  • Comment author
    Niles Simmons

    Is it only the Mavic Air 2 that has that problem?

    0
  • Comment author
    Jim McAndrew Dronelink Staff
    • Edited

    It affects the whole app.

    0
  • Comment author
    Waynedeeln

    I was a long time user of Autopilot with a Phantom 3 Pro and at the time I didn't think you guys could improve it any more than it already was. Once the bugs with  DJI are worked out on the MA Air 2   this app will rock. It works wonderfuI with my trusty Phantom 3.I still get a rush when I hit the ready to fly button and the Phantom takes off like a bat out of hell and starts the mission. 

    0
  • Comment author
    Niles Simmons

    Thanks for reply.
    Hope you get it fixed as soon as possible so we can get out and fly missions again ;)

    0
  • Comment author
    Ron

    I see there is a new release of the Mobile SDK as of January 2.  Is that the one that is supposed to correct the problem so that we can get MA2 support working?  Thanks!

    0
  • Comment author
    M

    I'm very excited about this - I hope the new sdk works out

    0
  • Comment author
    CraigW

    Looks like the V4.14 Trial2 is only for IOS right now.

    0
  • Comment author
    M

    So that means I need to use my iPad instead of my android phone? I could handle that

    0
  • Comment author
    Niles Simmons

    Do you have a cautious prediction for when we are ready to fly with our dji Mavic Air 2 with Dronelink?
    Here where I am, it's cold, so I just want to send my Mavic on missions  ;)

    Regards

    Niles

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    You can do it right now in the iOS beta.

    0
  • Comment author
    Ron

    How does one get the IOS beta?

     

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    https://support.dronelink.com/hc/en-us/articles/360033520874-How-do-I-install-the-beta-native-app-

    0
  • Comment author
    Ron

    Thanks!

     

    0
  • Comment author
    Niles Simmons

    Thanks!
    I was not aware of that  ;)

    0
  • Comment author
    Ninja_Geezer

    what is the best version of dronelink to purchase for a beginner ,any advice.

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    It really depends on what features you need. You can compare plans here. Or just click this button:

    0
  • Comment author
    M

    Hows the android version for the MA2 looking? I know there was an addl release not too long ago

    Thanks!

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    No progress :(

    0
  • Comment author
    M

    Thanks Jim. Bummer to hear but I'm sure you guys working hard on it are more bummed.

    Is there reasonable hope? Or is it a matter of time on this current sdk? Or need another release?

    0
  • Comment author
    Ninja_Geezer

    Thanks Arizona Wyldwest i think i will try the premium ,like you said can always upgrade if needed later on.

    i am hoping to use it on my MA2 with ipad mini 5th gen cellular model.

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    Like I said above, we are waiting on DJI to fix some things, and they have not indicated a timeline.

    0
  • Comment author
    M

    Thanks Jim.

    I only have an Ipad Air 2 and in the support link it said that ipad air 2 was not recommended. 

    Unfortunately I don't have the ability to purchase a new ipad but would like to use the waypoints.

    Do I run great risk in losing/damaging drone by trying with ipad air 2?

    0

Please sign in to leave a comment.