IOS V2.0.1 (136) Battery Error Message
Hello, the other morning using v2.0.1 (136 build on ios with a Mavic Mini) I took off with fully charged pack. Hovered locally for approx 30 seconds and then started a flight plan. Within a couple of seconds of it starting, the message below appeared. I promptly cancelled the plan and landed. According to dronelink (and confimred with DJI FLY app) the battery was still at 97%. I took off and hovered and engaged another flight plan at 96% battery capacity and within a few seconds I received the same message. I cancelled and landed. I then took off again and flew approx 50m away and then engaged the on the fly spiral plan, which worked fine without any errors. It was about +2c at ground level and the error occurred at less than 10m altitude. Dronelink (and DJI FLY) was reporting the correct battery level on the screen (later compared to the Airdata logs). The airdata logs show that my battery temps that day were between +13c & +24c. Any suggestions as to what the issue might be, is there something I should check for in the flight plans that could cause this error?
Thanks
Duncan

Comments
4 comments
Here are links to the two flight plans involved.
https://app.dronelink.com/duncan-lovett/test/plan/ENjluM6ATroOjfsVzg6r/1Ge9e7v4uOVVUnxTQpzA
https://app.dronelink.com/duncan-lovett/test/plan/mCNNpj4ICsinEw1hZG1f/RpOIkiBW78R7ufIqpDpr
This error means one of your required commands is failing. In this case, the Drone Low Battery Warning Threshold command:
You either need to mark it as not required, or change the value to something that the drone supports.
Thanks Jim, is there a document showing which dronelink commands are suppported by which drone?
Thanks
This is currently a feature request.
Please sign in to leave a comment.