mismo problema se suspende el plan de vuelo en air 2

Diego Saenz

a mi me pasa lo mismo necesito solucionar ese tema por algo se paga la licencia 

1

Comments

11 comments

  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    What is the question ? I’d watch these new help tutorials and then see if you can’t figure out how to get it working. You need the correct app for your drone and controller. If you still cannot get it working then be specific on what the issue is and which drone model and controller you’re using.

    https://www.youtube.com/playlist?list=PL3wRlldCPXFge3fsaDmnOK5BcDeiVR3M1

    1
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    Diego. Where have you been for the mast 5 months ? Lol.. Need more info. What Dronelink version are you using, what message is displayed, are you in an Geo zone etc. Are you using Dronelink or Dronelink DJI app ? Will need more info with either screenshot or recording of the issue. I have been using DL for over 3 years with my MA2 and it it works great. Check the link. If you still can’t get it working then please share the plan.

    https://support.dronelink.com/hc/en-us/articles/360056104694-Why-do-I-see-Unable-to-Take-Control-or-Automatic-Control-Interrupted-during-missions

    1
  • Hola Mike. Me sucede el mismo error. Asumo que es una falla de la propia aplicación Dronelink. En mi caso se trata también de un DJI Air 2S, una vez iniciada la misión la aplicación me lanza este mismo mensaje que publica Diego. He logrado paliar el asunto moviendo el interruptor de modo de vuelo a sport y luego regresando a modo normal y reiniciando (con el dron suspendido) aunque es muy molesto eventualmente (3 o 4 intentos) reacciona la aplicación y toma el control del dron.

    Insisto en que se trata de una falla de la aplicación, porque con DJI Fly, el dron funciona perfectamente. Anteriormente ya intenté corregir el problema con las indicaciones del enlace que comparte pero no funciona. https://www.youtube.com/playlist?list=PL3wRlldCPXFge3fsaDmnOK5BcDeiVR3M1

    Te pido por favor que consideres que no dispongo de mucho tiempo estar probando o adivinando cuál es problema y la solución. Espero me puedas auxiliar.

     

     

    1
  • Comment author
    Diego Saenz

    tengo el dronlink pague la licencia pro al principio trabajaba muy bien  con mi air 2 pero ahora se pausa la misión al minuto de arrancar que puedo hacer para solucionar ese problema

    0
  • Comment author
    Diego Saenz

    bueno en zona rural en el departamento de Boyacá Colombia, la versión es 4.9.2 me muestra el siguiente mensaje: (CONTROL AUTOMATICO INTERRUMPIDO el dron debe permanecer en modo de vuelo P-GPS para el control automático) si estoy en una zona geográfica estoy usando DRONELINK  

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    Check the link I sent. Sounds like you don’t have the speed mode switch in P mode, “normal” position. You should also correct the error in the screenshot by formatting the SD card as indicated for future flights so you won’t get another problem later. The app is working so it’s somewhere in your set up. Again, check the link I sent.

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    JOSÉ RAMÓN SALAZAR VILLALOBOS. Ok Sir but to be clear I don’t work for Dronelink, I’m just a Hobbyist pilot trying to help. I’m using DL version 4.9.2 (291) with my MA2 using an iPad 11 Pro. I recently ran several missions without any issues. What device model are you using as DL may need to this info. If there is an issue then either Jim or one of the DL staff will need to look into this. Also the link you sent is not for this error. I’m sending the link again for the “automatic control interrupted” message which I sent 9 days ago. Check to make sure you have checked all the possible reasons why you could be receiving this error message. If you still continue to have issues then report back and DL will need to help. Again, please advise what device manufacture and model you are using along with which Dronelink version you are using.

    https://support.dronelink.com/hc/en-us/articles/360056104694-Why-do-I-see-Unable-to-Take-Control-or-Automatic-Control-Interrupted-during-missions

    0
  • Comment author
    Diego Saenz

    hola mike no si tu te das cuenta en la parte de superior de la izquierda indica el modo y esta en gps y el control lo tengo en normal en el centro pero se pasa solo y la tarjeta ya la formatee y persiste el letrero

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert

    Ok Diego. Is the drone firmware up to date, what version is it ? Not sure what else I can suggest and it is working with my MA2 without any issues using iPad. If it’s something else unknown to me then DL will need to assist further at this point. If you share the plan someone can take a look at it to make sure it isn’t the plan itself. Share as viewer only.

    https://support.dronelink.com/hc/en-us/articles/7912083943059-Sharing-Mission-Plans

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    Regarding your SD card error, If it is recording video or saving photos to the SD card then it’s a false error and can be hidden. More than likely a false error in the DJI SDK and DL just reports it. So if it is saving to SD card I’d just hide it. These false errors are usually when using an Android OS device. What manufacture model are you using ? 

    https://support.dronelink.com/hc/en-us/articles/10182372367123-View-and-Hide-Flight-Statuses

    0
  • Comment author
    Alejandro Dabroy

    Ayer vole mi dron Air 2S en una misión de 65 ha con un S22 Ultra y todo bien. Una opcion es probar con otro dispositivo y comprobar si te funciona.

    0

Please sign in to leave a comment.