Adjust flight plan from input of lower resolution map

October 29, 2023 18:37
5 comments

Is it possible to bring in a lower resolution orthomosaic into dronelink in order to adjust flight plans to account for real-time conditions? For example, flying a construction site at a higher elevation, bring in the ortho, change flight plan to account for tower crane location, allowing a lower elevation flight.

Thanks, Mike

Comments

5 comments

Martin Reading Dronelink Expert
- Edited October 29, 2023 18:58
Hi Mike Liggett, no you can't do what you want directly in Dronelink, however you can do it via google earth, check this out https://youtu.be/1SFAeUbD50Q

And also this https://youtu.be/uHDxgYw3gMM

0
Mike Liggett
- October 29, 2023 19:57
Thanks Martin-

I have tested this before, but wonder how accurate the overlay process is within Google Earth. Sometimes, I am dealing with some tight tolerances.

thx

0
Jim McAndrew Dronelink Staff
- October 29, 2023 20:16
Are you using RTK?

0
Mike Liggett
- October 29, 2023 20:28
Yes

0
Jim McAndrew Dronelink Staff
- October 29, 2023 20:52
You may want to consider geo-rectification then: https://support.dronelink.com/hc/en-us/articles/4416141457171-How-to-Enable-Drone-Offsets-Mission-Alignment-Georectification-#heading-3

0