DJI MINI 3, RC-N1, SAMSUNG A03, DL (268), ANDROID 12

test today with:
DJI MINI 3
RC-N1
SAMSUNG A03
ANDROID 12
RL V(268)

At the beginning I had connection problems starting the SDK which I solved in this way:
-start control and drone
-start dji fly
-put in photo mode
-switch to cinema mode
-forced shutdown dji fly
-start DL

After being able to have a connection with the drone I had problems with a mapping at the beginning the mission flew for 15 seconds and it took me out, I solved it by doing what I mentioned above

I was able to complete a mapping mission of 1 minute and 48 seconds

but i got images like these

0

Comments

3 comments

  • Comment author
    Victor Manuel Dominguez

    of 18 photographs 10 are distorted

    0
  • Comment author
    Mike (Arizona Wyldwest) Dronelink Expert Dronelink Expert
    • Edited

    Out of focus or distorted photos are usually do to the mapping settings. In general the drone speed is too fast and/or to low in altitude to get clear photos. What altitude was it set to ? Looks like about 60m so roughly 180’. Default mapping altitude is set to 285’ so looks a bit low and will depend on what the actual speed was during those captures. Way too many variables so sharing your plan will help. 

    0
  • Comment author
    Victor Manuel Dominguez

    Mike (Arizona Wyldwest)

    I will appreciate your advice
    height: 196 feet/60 meters
    speed: 4.47 mts/sec / 16.1 km/hr

     

    0

Please sign in to leave a comment.