New Zoom Control

I tested the new Zoom functions with my MA2, RC-N1 controller using iPad. 1080 & 2.7K resolution works great without any issues. Of course you will need to either open DJI app to set it to either of those resolution or you can switch to the Classic dashboard quickly and check which one it’s set to then you can switch back to modern dashboard. The Modern dashboard has no way to change any Resolution & Frame Rate still so it must set to whichever resolution you want to use for it to work. Also can be done by placing a camera command as well. The 4K Zoom is a bit different due to it having a separate 4K Zoom setting which needs to be selected. It will only work if you set the camera to the “4K Zoom” setting in DJI App first or switch to Classic dashboard and select “4K HQ” which I figured out enables the Zoom. Not sure why it says 4K HQ but could be a DJI software thing. If it’s set to normal 4K you will have no Zoom control. If you use a camera reset list like I do with a 4K Res/ FR command in it you will need to remove it. If you leave a command for 4K it will reset it to normal 4K mode and the zoom slider disappears and the function button with jug wheel won’t work. Not sure if DL can add a 4K resolution Zoom command in the DL Web app but as for now it has none. Just some observations and information and if set up correctly for 4K Zoom it should work. I ran a several quick path missions with all three resolutions and the zoom function works great just like with the DJI app. Nice new feature. Hope this helps and good luck.