Durante la missione si blocca la registrazione video dopo alcuni secondi
Drone: DJI Mavic Mini
SSD formatting: done with PC, performed with DJI Fly and with Maven Lite. Everything OK.
Formatting with Dronelink cannot be done.
Micro-ssd card: ScanDisk Ulta 32Gb HC I 10
The last recording lasted 24 seconds while the mission was 4:43 minutes.
During the flight, the message of having to format the card continues.
Sometimes it stops but continues to record, but it can happen that after a few seconds it stops recording and the mission continues until the end.
The situation of not registering is now quite frequent.
Comments
2 comments
DL is just reporting errors from the camera system from DJI's SDK.
This may not be the issue Davide but I’d suggest only using a V30 SD card. It may work most of the time but much better to use a much faster speed rated card. Other then that It could be a bad or corrupted card as well. Also the DL app should be able to format it but if you can’t then try with the DJI Fly app and see if it can. Possible issue with SD card so maybe try performing a full format, not just a quick format which is usually the default.
Please sign in to leave a comment.