Mission will not start - Version 4.7.0 (260)
I downloaded Version 4.7.0 (260) today to test. I pressed the mission start button and nothing happened. The mission would not start. I had 20+ satellites. I am running on Android 10. It showed that it saw my Mini 3 Pro. The mission was set to Mavic Mini 3 Pro (48). I was running in Normal mode, not Cini or Sport mode.
The mission started with previous versions.
What would be wrong?
Thanks for your help.
Deidrich Fehr
Comments
5 comments
Can you please re-download the app and see if it fixes the issue?
I deleted the app, re-downloaded and installed. I then turned of obstacle avoidance. I was then able to run the mission. However, it failed several times, lost communication with drone. I had to always start the DJI Fly app, move the drone a slight amount, leave the DJI Fly app, and then go back into the Dronelink DJI app. I was then able to continue until I lost comms again. This happened several times.
Thanks
Deidrich
Curious if you were running both apps at same time ? If so you need to force close DJI.
No, I was not running both at the same time. I always shut down the one before I started the other, and vice versa
What message did it give you ? Losing connection sounds like something else. Connection to drone Should work no differently then when using either app. If the connection is lost for even a brief amount of time the mission may stop since it needs a constant clear connection at all times in order for the commands to be sent continuously. It may have been a brief amount of time and by the time you closed DL and opened the DJI App it may have reestablished a connection. Possible Distance or any interference however brief or a combination of both can be why. Just something to consider. What was the distance and have you tried flying in a different location to see if it happens.
https://support.dronelink.com/hc/en-us/articles/360056104694-Why-do-I-see-Unable-to-Take-Control-or-Automatic-Control-Interrupted-during-missions-
Please sign in to leave a comment.