Mavic 3 Multispec used the same as enterprise

HighRes LLC
The enterprise has great support and features already. The Multispec works doing panos and orbits but some features could be prioritized. Being able to see and change camera parameters in the lower right portion of the screen is 1st. At the moment, they only show N/A for f stop, shutter, ev, and so on. Selecting the interval rate is 2nd. Switching between .7 and 1 second intervals is useful. Right now, you only get an error if you attempt to. When doing close proximity orbits around towers, sometimes the radios create a ton of disturbance and the drone temporarily loses global positioning, sending the drone in a random direction. One fix would be to disable the virtual sticks when total gps is lost. I prefer the drone hovering rather barreling into a tower or other structure. 4th is peaking. I understand that it might not be enabled in the sdk, but it would be a great aid in producing accurate models. Thank you for creating a useful tool!
0

Comments

2 comments

Date Votes
  • Comment author
    HighRes LLC

    I forgot one. Being able to lock in a specific degree per second in the orbit would be amazing. That way if you adjust the distance from center, or radius, the software would compensate for the change by automatically increasing or decreasing the speed to maintain the degree spanned per second.

    0
  • Comment author
    Jim McAndrew Dronelink Staff

    At the moment, they only show N/A for f stop, shutter, ev, and so on.

    For any selected lens?

    One fix would be to disable the virtual sticks when total gps is lost

    DL is already programmed to stop the mission after 1s of delayed telemetry. Is this not happening?

    4th is peaking. I understand that it might not be enabled in the sdk

    Nothing we can do about this until DJI adds it.

    Being able to lock in a specific degree per second

    Is there a use case behind this request - for example, are you looking for a specific photo overlap or a specific number of photos per orbit?

    0

Please sign in to leave a comment.