App 4.5.0 build 240 keeps shutting down on its own
On my Samsung S22.
1. Keeps shutting down while trying Edit Mapping Plan.
2. Can't find Mini 3 Pro in the Drone list at all.
3. Where is the Web App? Can't find the Beta Webapp either. Need to have the Mini 3 Pro in the Mapping Drone Lists.
4. Got a popup message in the Android App saying "Obstacle Avoidance not Supported".
Comments
43 comments
JIM,
I finally got a response from DJI about the sensor / camera specs. Here you go:
Dear Customer,
Thank you for contacting DJI Technical support.
Upon checking with our engineer team, here are specs of the camera that you need about Mini 3 and Mini 3 pro:
The specs are the same for Mini 3 and Mini 3 pro
Focal Length: 24 mm
Image sensor: 1/1.3-inch CMOS, pixel size: 1.197 μm ×1.197 μm, actual CMOS size (L×W): 9.65 mm×4.24 mm
Max Image Size：8064mm×6048mm
Using the DJI APP - the one with the "Beta" banner at the bottom right. The only thing the drone will do is move the Gimbal up and down. There is no video or other telemetry. The app version is 4.5.1 (249) Kernel 4.5.0. Here is the message in DL App:
249 is the last update, right ?
This is the Dronelink DJI app, not the Dronelink app correct?
Does the app have a network connection?
Is the drone on the latest firmware?
Correct on all points.
In the past, error 180 was due to the Remote ID firmware upgrade (not being on the latest firmware), and later an issue when DJI's remote ID servers weren't responding:
https://support.dronelink.com/hc/en-us/community/posts/10831833502611
Good news to report.
I flew today with latest DJI Firmware (just released today). The DL version was 4.5.1 (Build 250). Result - No problem with Telemetry. No error 180.
The 4 component mission went off without a hitch -
1. Waypoints,
2. Orbit,
3. Linear Map,
4. Mapping.
All worked perfectly with the Mini 3 Pro today.
Well Done.
Daniel.
Good to hear Daniel.
Interesting…we didn’t change anything….
Well... The Kernel upgraded for me in DL. and the Build # went from 249 to 250. So thanks for the continuous improvements!
No problem. Ya, we made some other unrelated changes and added a few features, but as for the app crashing stuff, still waiting on DJI.
I Spoke too soon. The Dronelink DJI app just closes down about a minute into the flight. Happens a lot. Should I revert to the normal Dronelink app? When I use this "standard" app it shows Beta at the bottom right and Version 4.6.0 (Build 254). Is that correct and will the situation improve?
If you mean the Dronelink app (not the Dronelink DJI app) which does not support the Mini 3, then yes, that will correct the issue. The Dronelink DJI app crashes because of an inherent, underlying limitation of the DJI MSDKv5 on newer versions of Android as discussed here:
https://support.dronelink.com/hc/en-us/community/posts/16409496589331-Feedback-for-Beta-Mini-3-Pro-Performance-Stability-Non-flight-regime?page=1#community_comment_16410305783571
Please sign in to leave a comment.